How to install the wardrobe

2022-07-22
  • Detail

The wardrobe is an essential furniture in the home, and its volume is not small (the small wardrobe can't fill a few clothes), which means that the finished wardrobe can't be directly moved into the home. You need to move the materials of the wardrobe assembly into the room for assembly first, so what I share today is the analysis of the installation steps of the wardrobe. Let's see how the wardrobe is installed

the wardrobe is an essential furniture in the home, and its volume is not small (the small wardrobe can't fill a few clothes), which means that it's impossible to move the finished wardrobe directly into the home. You need to first move the materials of the wardrobe assembly into the room for assembly, so today I share with you the analysis of the wardrobe installation steps to see how the wardrobe is installed

1. Installation Preparation of wardrobe installation steps

a, material arrival

generally speaking, the wardrobe, plates, hardware, etc. purchased from the regular wardrobe manufacturer will help send them home, and these materials are well packed to avoid collision and damage. We all need to unpack and check whether these materials are intact

b, fixing screws

nail holes will be reserved on the wardrobe plate according to the design drawing or the actual assembly needs, so as to avoid accidental loss during installation. It is OK to fix the screws directly on site with special tools

c, cut the side plate

the skirting line of the wardrobe placed against the wall needs to be sawed off, so that the wardrobe can be placed close to the wall

2. After the installation steps of the wardrobe are ready, you can start to install the floor of the wardrobe. If the floor is clean, you must know that the floor of the wardrobe is difficult to clean

b, fixed frame

install the side plate and back plate according to the wardrobe plate structural parts, and fix the frame of the body first

c, install the top plate

installing the top plate requires a herringbone ladder, which will be more convenient. After all, the wardrobe is generally more than 2m high, and then the top plate house is on the top surface, which is fixed with rivets

d. Install shelves

partitions are the plates in the dividing space of the wardrobe. This is done after the top plate is installed. As long as the shelves are placed in a fixed position and fixed, special attention is paid here to the appropriateness of each partition. The partition, the back plate and the side plate should be fixed.

e, fixed door rails

then you can start installing door rails at the top and bottom of the wardrobe, It is better to choose alloy materials with light and solid quality

f, installing the clothes rod

installing the clothes rod is relatively simple. Fix the fixing rivets and pay attention to the balance on both sides

3. The final acceptance of the wardrobe installation steps

a, install the door leaf

install the door leaf, fix it first, and then fix the guide rail at the bottom, so as to avoid the door leaf falling off during the installation process

b, adjustment and improvement

after all installation, it is necessary to check the whole, and adjust if there is any deviation

c, complete the acceptance

finally shake down the cabinet to see if it is firm

editor's summary: the above is the analysis and introduction of the installation steps of the wardrobe. These steps are very basic. If you want to install the wardrobe well, you can't be careless. Moreover, the more complex the design or the more functions, the more troublesome the installation of the wardrobe will be

唐山男科医院

上海眼科医院

济南肝病医院

Copyright © 2011 JIN SHI